A new PXI I/O module is now available to improve performance of the M947XA and M9485A PXIe multiport vector network analyzer (VNA) modules.
The M9341B PXIe Digital/Analog I/O is equipped with a 24-bit digital I/O and an 8-bit digital I/O to allow users to control the device under test (DUT) directly with serial or parallel digital signals. For example, the signals from the M9341B can be applied to select operation modes of the RF front-end module which integrates power amplifiers, switches, low noise amplifiers, duplexer or filters in a single component.
For more comprehensive analysis, the M9341B has four analog input connectors to allow sensing of DC voltages from the DUT. The measured DC voltage can be displayed on the PXI VNA screen. The 1-slot module also supports two variable DC source outputs to control the DUT, while the DC source current can be monitored during measurements.
M9341B PXIe Digital/Analog I/O datasheet
For more information: Contact NSCA Tra-Cal or call 1-888-280-6722 if you have questions.

