Description
Description
The Logic Analyser module fitted in my TLA714 is a 7N4 – giving 136 available channels. Each group of 17 channels (16 data plus 1 clock/data) has an IDC socket on the logic module which connects to a 17 channel probe, a fully configured 7N4 would therefore require 8 probes to allow connection to each of the 136 channels. This is rather more than I need, at least for now, but Inaki has suggested that I would need at least 32 channels to properly analyze an 8 bit micro like my Memotech MTX – 16 Address lines, 8 Data lines and 8 Control lines so two probes will be necessary to cover these requirements.
Key Features
- Holds 4 single-wide or 2 double-wide modules
- Instrument modules include logic analyzers, pattern generators and digitizing oscilloscopes
- Up to 800 MHz state acquisition with 1.2 GB/s data rate for advanced processors and buses
- 8 GHz deep timing analysis
- MagniVu™ technology provides 500 ps timing resolution on all channels all the time through the same probe
- Simultaneous state and high speed timing analysis through the same probes pinpoints elusive faults
- Broad processor and bus support universal source code support for correlating high-level language source with real-time trace
- Performance analysis support for optimizing target system remote control using Microsoft COM/DCOM technology supports advanced data analysis
- Microsoft Windows PC platform provides familiar user interface with network connectivity
- Intel Pentium MMX 266MHz CPU
- Up to 256MB RAM (by SDRAM PC100 2 x SO-DIMM modules)
- Intel 430VX chipset
- IDE 2.5″ HDD and IDE CD-ROM drives
- 800×600″ TFT with 2MB embedded VGA
- 3.5″ Floppy Disk Drive
- Built in trackpad and external PS/2 Keyboard & Mouse connectors
- 2 x USB Ports
- 2 x PCMCIA (PCCard) Slots
NIST-Traceable Calibrations
Standard Calibration Price (without data): Request a Quote
ANSI Z540 Calibration Price (with as-found & as-left data): Request a Quote
ISO/IEC 17025:2005 Accredited Calibration Price (with data & uncertainties): Request a Quote
ANSI Z540.3 with data & uncertainties and Guardbanding: Request a Quote
Test & Measurement Equipment Repair Services: Request a Quote
