Description
The Acterna TTC 2000 is one of our used Test Pads with the FST-2310 Network Testing Module.
Monitor and perform BERT testing & voice quality of your network.
Verify proper network routings and signal delays.
Ensure high quality transmission and signaling performance of T1 voice trunks.
Performance Characteristics of the TTC2000 Test Pad
| Form Factor: | Mainframe |
| Optical Test Interface: | |
| Electrical Test Interface: | |
| DS1 Drop & Insert to DS-3: | Option |
| DS-1/DS-3 Drop & Insert to SONET: | Option |
| DS-0 Drop & Inster to DS-1: | No |
| DS-0 Drop & Insert to DS-3/SONET: | No |
| OC-48 Through Mode: | Option |
| ATM Testing: | No |
| Stratum III Clock: | No |
| SONET VT1.5,DS-3,ATM Mapping: | No |
| VBR, CBR, UBR Shaping: | No |
| ATM QoS Measurement: | No |
| DCC Drop & Insert: | No |
| ATM VP/VC & OAM Support: | No |
| ATM 250 Channel Tx & Rx: | No |
| ATM HEC Error Generation & Analysis: | No |
| Raw BITS Output From SONET: | No |
| Fractional T1 (nx56/nx64) Drop & Insert: | Option |
| VF Channel Drop & Insert Test: | Option |
| Alarm and Status LEDs: | No |
| Alarm Status Monitoring: | No |
| Alarm Generation: | No |
| Loop Backs: | No |
| Display Type: | Mono CRT |
Programmability/Connectivity of the TTC2000
| User Interface: | Proprietary |
TTC2000 Compliance
| CE Compliance: | Not on file |
| UL Compliance: | Compliant |
TTC2000 Power Requirements
| Input Power: | Not required |
| Battery Requirement: | 11 V |
| Battery Life: | 2 hrs |
TTC2000 Physical Dimensions
- Width: (N/A)
- Height: 190 mm(7.48 in)
- Length: 57 mm(2.24 in)
- Weight: 2.3 kg(5.07 lb)
FST-2310 TestPad
The FST-2310 TestPad has put the power to provision, troubleshoot, and maintain DS0 to OC-48 services in your hands, minimizing lost revenue on your network.
Highlights
- Comprehensive testing with multirates, multiservices, and multimodes.
- Easy-to-use, touch-screen graphical user interface (GUI) simplifies and expedites testing.
- Engineered for the field with rugged construction, lightweight design, and battery-powered operation.
- Modular TestPad 2000 architecture enables up-to-date support for established and emerging technologies in a single platform.
- Automated testing features minimize training costs and testing complexity.
- Remote control functionality using the module’s GUI.
Applications - Perform end-to-end BER testing using a wide range of stress test patterns.
- Analyze network performance by simulating abnormal conditions and inserting various errors and alarms.
- Perform in-service monitoring of the circuit under test to ensure Quality of Service (QoS).
- Verify proper provisioning of network multiplexers and demultiplexers.
- Verify proper network timing by measuring jitter at DS1 and DS3 tributary interfaces.
- Qualify protocol services such as ATM, GR-303, and ISDN and decode protocol messages.
- Perform bulk payload testing on SDH circuits at STM-1c/-4c/-16c rates.
- More Information.
Key Features
- Multi-rate transmission testing from DS0 to OC-48 in a single, handheld unit.
- Multi-service testing capabilities including ATM, GR-303, ISDN, signaling, voice frequency (VF), and digital data service (DDS).
- Ability to manipulate bytes in the SONET overhead.
- Multiple operation modes to terminate and monitor circuits from various network access points.
- Application-driven icons, auto configuration, dual PCMCIA slots, built-in microphone, speaker, and additional handset port.
- VT100 emulation
Calibration
Standard calibration with a 90-day warranty included. Please contact us for additional calibration service prices.
NIST-Traceable Calibrations
Standard Calibration Price (without data): Request a Quote
ANSI Z540 Calibration Price (with as-found & as-left data): Request a Quote
ISO/IEC 17025:2005 Accredited Calibration Price (with data & uncertainties): Request a Quote
ANSI Z540.3 with data & uncertainties and Guardbanding: Request a Quote
Test & Measurement Equipment Repair Services: Request a Quote
