Agilent HP 8712ET 300 kHz to 1.3 GHz Network Analyzer

Agilent HP 8712ET 300 kHz to 1.3 GHz Network Analyzer



Description: The HP Agilent? 8712ET is a used 300 kHz to 1.3 GHz, Network Analyzer.

Product Specs:
  • Narrowband and broadband detection
  • 100 dB dynamic range
  • Real-time sweep speeds (40 ms/sweep)
  • Integrated T/R test set
  • Synthesized source with 1-Hz resolution
  • Standard LAN interface
  • Standard Internal Agilent Instrument BASIC (IBASIC)
  • Standard 2, 6, and 12-port switching test sets available
  • Optional fault-location and SRL measurements

Other Info:
The Agilent HP 8712ET, Network Analyzer, features a built-in transmission/reflection test set with a full range of magnitude and phase measurements.

Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ vector-error-correction techniques to enhance measurement accuracy.

For a wider range of output power levels to test active devices and components, Option 1E1 adds a 60-dB step attenuator as a standard feature, which extends the lowest power-level setting to -60 dBm. Both 50-ohm and 75-ohm versions are available.



Contact Us

  • Model: 8712ET
  • Manufactured by: Agilent HP

Home   |    Specials   |   All products   |   Obtain Equipment   |   Cal & Repair   |    About Us   |    Contact us
© 2011 NSCA Inc